diff options
Diffstat (limited to 'scripts')
42 files changed, 1758 insertions, 726 deletions
diff --git a/scripts/Makefile.build b/scripts/Makefile.build index a5ac8ed1936f..8403eba15457 100644 --- a/scripts/Makefile.build +++ b/scripts/Makefile.build @@ -41,20 +41,6 @@ include $(srctree)/scripts/Makefile.compiler include $(kbuild-file) include $(srctree)/scripts/Makefile.lib -# Do not include hostprogs rules unless needed. -# $(sort ...) is used here to remove duplicated words and excessive spaces. -hostprogs := $(sort $(hostprogs)) -ifneq ($(hostprogs),) -include $(srctree)/scripts/Makefile.host -endif - -# Do not include userprogs rules unless needed. -# $(sort ...) is used here to remove duplicated words and excessive spaces. -userprogs := $(sort $(userprogs)) -ifneq ($(userprogs),) -include $(srctree)/scripts/Makefile.userprogs -endif - ifndef obj $(warning kbuild: Makefile.build is included improperly) endif @@ -71,7 +57,6 @@ endif # subdir-builtin and subdir-modorder may contain duplications. Use $(sort ...) subdir-builtin := $(sort $(filter %/built-in.a, $(real-obj-y))) subdir-modorder := $(sort $(filter %/modules.order, $(obj-m))) -subdir-dtbslist := $(sort $(filter %/dtbs-list, $(dtb-y))) targets-for-builtin := $(extra-y) @@ -363,7 +348,7 @@ $(obj)/%.o: $(obj)/%.S FORCE targets += $(filter-out $(subdir-builtin), $(real-obj-y)) targets += $(filter-out $(subdir-modorder), $(real-obj-m)) -targets += $(real-dtb-y) $(lib-y) $(always-y) +targets += $(lib-y) $(always-y) # Linker scripts preprocessor (.lds.S -> .lds) # --------------------------------------------------------------------------- @@ -389,7 +374,6 @@ $(obj)/%.asn1.c $(obj)/%.asn1.h: $(src)/%.asn1 $(objtree)/scripts/asn1_compiler # To build objects in subdirs, we need to descend into the directories $(subdir-builtin): $(obj)/%/built-in.a: $(obj)/% ; $(subdir-modorder): $(obj)/%/modules.order: $(obj)/% ; -$(subdir-dtbslist): $(obj)/%/dtbs-list: $(obj)/% ; # # Rule to compile a set of .o files into one .a file (without symbol table) @@ -405,12 +389,8 @@ quiet_cmd_ar_builtin = AR $@ $(obj)/built-in.a: $(real-obj-y) FORCE $(call if_changed,ar_builtin) -# -# Rule to create modules.order and dtbs-list -# -# This is a list of build artifacts (module or dtb) from the current Makefile -# and its sub-directories. The timestamp should be updated when any of the -# member files. +# This is a list of build artifacts from the current Makefile and its +# sub-directories. The timestamp should be updated when any of the member files. cmd_gen_order = { $(foreach m, $(real-prereqs), \ $(if $(filter %/$(notdir $@), $m), cat $m, echo $m);) :; } \ @@ -419,9 +399,6 @@ cmd_gen_order = { $(foreach m, $(real-prereqs), \ $(obj)/modules.order: $(obj-m) FORCE $(call if_changed,gen_order) -$(obj)/dtbs-list: $(dtb-y) FORCE - $(call if_changed,gen_order) - # # Rule to compile a set of .o files into one .a file (with symbol table) # @@ -450,15 +427,26 @@ intermediate_targets = $(foreach sfx, $(2), \ $(patsubst %$(strip $(1)),%$(sfx), \ $(filter %$(strip $(1)), $(targets)))) # %.asn1.o <- %.asn1.[ch] <- %.asn1 -# %.dtb.o <- %.dtb.S <- %.dtb <- %.dts -# %.dtbo.o <- %.dtbo.S <- %.dtbo <- %.dtso -# %.lex.o <- %.lex.c <- %.l -# %.tab.o <- %.tab.[ch] <- %.y -targets += $(call intermediate_targets, .asn1.o, .asn1.c .asn1.h) \ - $(call intermediate_targets, .dtb.o, .dtb.S .dtb) \ - $(call intermediate_targets, .dtbo.o, .dtbo.S .dtbo) \ - $(call intermediate_targets, .lex.o, .lex.c) \ - $(call intermediate_targets, .tab.o, .tab.c .tab.h) +targets += $(call intermediate_targets, .asn1.o, .asn1.c .asn1.h) + +# Include additional build rules when necessary +# --------------------------------------------------------------------------- + +# $(sort ...) is used here to remove duplicated words and excessive spaces. +hostprogs := $(sort $(hostprogs)) +ifneq ($(hostprogs),) +include $(srctree)/scripts/Makefile.host +endif + +# $(sort ...) is used here to remove duplicated words and excessive spaces. +userprogs := $(sort $(userprogs)) +ifneq ($(userprogs),) +include $(srctree)/scripts/Makefile.userprogs +endif + +ifneq ($(need-dtbslist)$(dtb-y)$(dtb-)$(filter %.dtb %.dtb.o %.dtbo.o,$(targets)),) +include $(srctree)/scripts/Makefile.dtbs +endif # Build # --------------------------------------------------------------------------- diff --git a/scripts/Makefile.dtbs b/scripts/Makefile.dtbs new file mode 100644 index 000000000000..46009d5f1486 --- /dev/null +++ b/scripts/Makefile.dtbs @@ -0,0 +1,142 @@ +# SPDX-License-Identifier: GPL-2.0-only + +# If CONFIG_OF_ALL_DTBS is enabled, all DT blobs are built +dtb-$(CONFIG_OF_ALL_DTBS) += $(dtb-) + +# Composite DTB (i.e. DTB constructed by overlay) +multi-dtb-y := $(call multi-search, $(dtb-y), .dtb, -dtbs) +# Primitive DTB compiled from *.dts +real-dtb-y := $(call real-search, $(dtb-y), .dtb, -dtbs) +# Base DTB that overlay is applied onto +base-dtb-y := $(filter %.dtb, $(call real-search, $(multi-dtb-y), .dtb, -dtbs)) + +dtb-y := $(addprefix $(obj)/, $(dtb-y)) +multi-dtb-y := $(addprefix $(obj)/, $(multi-dtb-y)) +real-dtb-y := $(addprefix $(obj)/, $(real-dtb-y)) + +always-y += $(dtb-y) +targets += $(real-dtb-y) + +# dtbs-list +# --------------------------------------------------------------------------- + +ifdef need-dtbslist +subdir-dtbslist := $(addsuffix /dtbs-list, $(subdir-ym)) +dtb-y += $(subdir-dtbslist) +always-y += $(obj)/dtbs-list +endif + +$(subdir-dtbslist): $(obj)/%/dtbs-list: $(obj)/% ; + +$(obj)/dtbs-list: $(dtb-y) FORCE + $(call if_changed,gen_order) + +# Assembly file to wrap dtb(o) +# --------------------------------------------------------------------------- + +# Generate an assembly file to wrap the output of the device tree compiler +quiet_cmd_wrap_S_dtb = WRAP $@ + cmd_wrap_S_dtb = { \ + symbase=__$(patsubst .%,%,$(suffix $<))_$(subst -,_,$(notdir $*)); \ + echo '\#include <asm-generic/vmlinux.lds.h>'; \ + echo '.section .dtb.init.rodata,"a"'; \ + echo '.balign STRUCT_ALIGNMENT'; \ + echo ".global $${symbase}_begin"; \ + echo "$${symbase}_begin:"; \ + echo '.incbin "$<" '; \ + echo ".global $${symbase}_end"; \ + echo "$${symbase}_end:"; \ + echo '.balign STRUCT_ALIGNMENT'; \ + } > $@ + +$(obj)/%.dtb.S: $(obj)/%.dtb FORCE + $(call if_changed,wrap_S_dtb) + +$(obj)/%.dtbo.S: $(obj)/%.dtbo FORCE + $(call if_changed,wrap_S_dtb) + +# Schema check +# --------------------------------------------------------------------------- + +ifneq ($(CHECK_DTBS),) +DT_CHECKER ?= dt-validate +DT_CHECKER_FLAGS ?= $(if $(DT_SCHEMA_FILES),-l $(DT_SCHEMA_FILES),-m) +DT_BINDING_DIR := Documentation/devicetree/bindings +DT_TMP_SCHEMA := $(objtree)/$(DT_BINDING_DIR)/processed-schema.json +dtb-check-enabled = $(if $(filter %.dtb, $@),y) +endif + +quiet_dtb_check_tag = $(if $(dtb-check-enabled),[C], ) +cmd_dtb_check = $(if $(dtb-check-enabled),; $(DT_CHECKER) $(DT_CHECKER_FLAGS) -u $(srctree)/$(DT_BINDING_DIR) -p $(DT_TMP_SCHEMA) $@ || true) + +# Overlay +# --------------------------------------------------------------------------- + +# NOTE: +# Do not replace $(filter %.dtb %.dtbo, $^) with $(real-prereqs). When a single +# DTB is turned into a multi-blob DTB, $^ will contain header file dependencies +# recorded in the .*.cmd file. +quiet_cmd_fdtoverlay = OVL $(quiet_dtb_check_tag) $@ + cmd_fdtoverlay = $(objtree)/scripts/dtc/fdtoverlay -o $@ -i $(filter %.dtb %.dtbo, $^) $(cmd_dtb_check) + +$(multi-dtb-y): $(DT_TMP_SCHEMA) FORCE + $(call if_changed,fdtoverlay) +$(call multi_depend, $(multi-dtb-y), .dtb, -dtbs) + +# DTC +# --------------------------------------------------------------------------- + +DTC ?= $(objtree)/scripts/dtc/dtc +DTC_FLAGS += -Wno-unique_unit_address + +# Disable noisy checks by default +ifeq ($(findstring 1,$(KBUILD_EXTRA_WARN)),) +DTC_FLAGS += -Wno-unit_address_vs_reg \ + -Wno-avoid_unnecessary_addr_size \ + -Wno-alias_paths \ + -Wno-graph_child_address \ + -Wno-simple_bus_reg +else +DTC_FLAGS += -Wunique_unit_address_if_enabled +endif + +ifneq ($(findstring 2,$(KBUILD_EXTRA_WARN)),) +DTC_FLAGS += -Wnode_name_chars_strict \ + -Wproperty_name_chars_strict \ + -Wunique_unit_address +endif + +DTC_FLAGS += $(DTC_FLAGS_$(target-stem)) + +# Set -@ if the target is a base DTB that overlay is applied onto +DTC_FLAGS += $(if $(filter $(patsubst $(obj)/%,%,$@), $(base-dtb-y)), -@) + +DTC_INCLUDE := $(srctree)/scripts/dtc/include-prefixes + +dtc_cpp_flags = -Wp,-MMD,$(depfile).pre.tmp -nostdinc -I $(DTC_INCLUDE) -undef -D__DTS__ + +dtc-tmp = $(subst $(comma),_,$(dot-target).dts.tmp) + +quiet_cmd_dtc = DTC $(quiet_dtb_check_tag) $@ + cmd_dtc = \ + $(HOSTCC) -E $(dtc_cpp_flags) -x assembler-with-cpp -o $(dtc-tmp) $< ; \ + $(DTC) -o $@ -b 0 $(addprefix -i,$(dir $<) $(DTC_INCLUDE)) \ + $(DTC_FLAGS) -d $(depfile).dtc.tmp $(dtc-tmp) ; \ + cat $(depfile).pre.tmp $(depfile).dtc.tmp > $(depfile) \ + $(cmd_dtb_check) + +$(obj)/%.dtb: $(obj)/%.dts $(DTC) $(DT_TMP_SCHEMA) FORCE + $(call if_changed_dep,dtc) + +$(obj)/%.dtbo: $(src)/%.dtso $(DTC) FORCE + $(call if_changed_dep,dtc) + +# targets +# --------------------------------------------------------------------------- + +targets += $(always-y) + +# %.dtb.o <- %.dtb.S <- %.dtb <- %.dts +# %.dtbo.o <- %.dtbo.S <- %.dtbo <- %.dtso +targets += $(call intermediate_targets, .dtb.o, .dtb.S .dtb) \ + $(call intermediate_targets, .dtbo.o, .dtbo.S .dtbo) diff --git a/scripts/Makefile.host b/scripts/Makefile.host index e85be7721a48..e01c13a588dd 100644 --- a/scripts/Makefile.host +++ b/scripts/Makefile.host @@ -160,3 +160,8 @@ $(host-rust): $(obj)/%: $(src)/%.rs FORCE targets += $(host-csingle) $(host-cmulti) $(host-cobjs) \ $(host-cxxmulti) $(host-cxxobjs) $(host-rust) + +# %.lex.o <- %.lex.c <- %.l +# %.tab.o <- %.tab.[ch] <- %.y +targets += $(call intermediate_targets, .lex.o, .lex.c) \ + $(call intermediate_targets, .tab.o, .tab.c .tab.h) diff --git a/scripts/Makefile.lib b/scripts/Makefile.lib index dae2089e7bc6..29bfd6ed3e3f 100644 --- a/scripts/Makefile.lib +++ b/scripts/Makefile.lib @@ -45,11 +45,6 @@ else obj-y := $(filter-out %/, $(obj-y)) endif -ifdef need-dtbslist -dtb-y += $(addsuffix /dtbs-list, $(subdir-ym)) -always-y += dtbs-list -endif - # Expand $(foo-objs) $(foo-y) etc. by replacing their individuals suffix-search = $(strip $(foreach s, $3, $($(1:%$(strip $2)=%$s)))) # List composite targets that are constructed by combining other targets @@ -80,19 +75,6 @@ always-y += $(hostprogs-always-y) $(hostprogs-always-m) userprogs += $(userprogs-always-y) $(userprogs-always-m) always-y += $(userprogs-always-y) $(userprogs-always-m) -# DTB -# If CONFIG_OF_ALL_DTBS is enabled, all DT blobs are built -dtb-$(CONFIG_OF_ALL_DTBS) += $(dtb-) - -# Composite DTB (i.e. DTB constructed by overlay) -multi-dtb-y := $(call multi-search, $(dtb-y), .dtb, -dtbs) -# Primitive DTB compiled from *.dts -real-dtb-y := $(call real-search, $(dtb-y), .dtb, -dtbs) -# Base DTB that overlay is applied onto -base-dtb-y := $(filter %.dtb, $(call real-search, $(multi-dtb-y), .dtb, -dtbs)) - -always-y += $(dtb-y) - # Add subdir path ifneq ($(obj),.) @@ -104,9 +86,6 @@ lib-y := $(addprefix $(obj)/,$(lib-y)) real-obj-y := $(addprefix $(obj)/,$(real-obj-y)) real-obj-m := $(addprefix $(obj)/,$(real-obj-m)) multi-obj-m := $(addprefix $(obj)/, $(multi-obj-m)) -dtb-y := $(addprefix $(obj)/, $(dtb-y)) -multi-dtb-y := $(addprefix $(obj)/, $(multi-dtb-y)) -real-dtb-y := $(addprefix $(obj)/, $(real-dtb-y)) subdir-ym := $(addprefix $(obj)/,$(subdir-ym)) endif @@ -238,7 +217,7 @@ modkern_rustflags = \ modkern_aflags = $(if $(part-of-module), \ $(KBUILD_AFLAGS_MODULE) $(AFLAGS_MODULE), \ - $(KBUILD_AFLAGS_KERNEL) $(AFLAGS_KERNEL)) + $(KBUILD_AFLAGS_KERNEL) $(AFLAGS_KERNEL) $(modfile_flags)) c_flags = -Wp,-MMD,$(depfile) $(NOSTDINC_FLAGS) $(LINUXINCLUDE) \ -include $(srctree)/include/linux/compiler_types.h \ @@ -248,19 +227,13 @@ c_flags = -Wp,-MMD,$(depfile) $(NOSTDINC_FLAGS) $(LINUXINCLUDE) \ rust_flags = $(_rust_flags) $(modkern_rustflags) @$(objtree)/include/generated/rustc_cfg a_flags = -Wp,-MMD,$(depfile) $(NOSTDINC_FLAGS) $(LINUXINCLUDE) \ - $(_a_flags) $(modkern_aflags) + $(_a_flags) $(modkern_aflags) $(modname_flags) cpp_flags = -Wp,-MMD,$(depfile) $(NOSTDINC_FLAGS) $(LINUXINCLUDE) \ $(_cpp_flags) ld_flags = $(KBUILD_LDFLAGS) $(ldflags-y) $(LDFLAGS_$(@F)) -DTC_INCLUDE := $(srctree)/scripts/dtc/include-prefixes - -dtc_cpp_flags = -Wp,-MMD,$(depfile).pre.tmp -nostdinc \ - $(addprefix -I,$(DTC_INCLUDE)) \ - -undef -D__DTS__ - ifdef CONFIG_OBJTOOL objtool := $(objtree)/tools/objtool/objtool @@ -350,94 +323,6 @@ cmd_objcopy = $(OBJCOPY) $(OBJCOPYFLAGS) $(OBJCOPYFLAGS_$(@F)) $< $@ quiet_cmd_gzip = GZIP $@ cmd_gzip = cat $(real-prereqs) | $(KGZIP) -n -f -9 > $@ -# DTC -# --------------------------------------------------------------------------- -DTC ?= $(objtree)/scripts/dtc/dtc -DTC_FLAGS += \ - -Wno-unique_unit_address - -# Disable noisy checks by default -ifeq ($(findstring 1,$(KBUILD_EXTRA_WARN)),) -DTC_FLAGS += -Wno-unit_address_vs_reg \ - -Wno-avoid_unnecessary_addr_size \ - -Wno-alias_paths \ - -Wno-graph_child_address \ - -Wno-simple_bus_reg -else -DTC_FLAGS += \ - -Wunique_unit_address_if_enabled -endif - -ifneq ($(findstring 2,$(KBUILD_EXTRA_WARN)),) -DTC_FLAGS += -Wnode_name_chars_strict \ - -Wproperty_name_chars_strict \ - -Wunique_unit_address -endif - -DTC_FLAGS += $(DTC_FLAGS_$(target-stem)) - -# Set -@ if the target is a base DTB that overlay is applied onto -DTC_FLAGS += $(if $(filter $(patsubst $(obj)/%,%,$@), $(base-dtb-y)), -@) - -# Generate an assembly file to wrap the output of the device tree compiler -quiet_cmd_wrap_S_dtb = WRAP $@ - cmd_wrap_S_dtb = { \ - symbase=__$(patsubst .%,%,$(suffix $<))_$(subst -,_,$(notdir $*)); \ - echo '\#include <asm-generic/vmlinux.lds.h>'; \ - echo '.section .dtb.init.rodata,"a"'; \ - echo '.balign STRUCT_ALIGNMENT'; \ - echo ".global $${symbase}_begin"; \ - echo "$${symbase}_begin:"; \ - echo '.incbin "$<" '; \ - echo ".global $${symbase}_end"; \ - echo "$${symbase}_end:"; \ - echo '.balign STRUCT_ALIGNMENT'; \ - } > $@ - -$(obj)/%.dtb.S: $(obj)/%.dtb FORCE - $(call if_changed,wrap_S_dtb) - -$(obj)/%.dtbo.S: $(obj)/%.dtbo FORCE - $(call if_changed,wrap_S_dtb) - -quiet_dtb_check_tag = $(if $(dtb-check-enabled),[C], ) -cmd_dtb_check = $(if $(dtb-check-enabled),; $(DT_CHECKER) $(DT_CHECKER_FLAGS) -u $(srctree)/$(DT_BINDING_DIR) -p $(DT_TMP_SCHEMA) $@ || true) - -quiet_cmd_dtc = DTC $(quiet_dtb_check_tag) $@ -cmd_dtc = $(HOSTCC) -E $(dtc_cpp_flags) -x assembler-with-cpp -o $(dtc-tmp) $< ; \ - $(DTC) -o $@ -b 0 \ - $(addprefix -i,$(dir $<) $(DTC_INCLUDE)) $(DTC_FLAGS) \ - -d $(depfile).dtc.tmp $(dtc-tmp) ; \ - cat $(depfile).pre.tmp $(depfile).dtc.tmp > $(depfile) \ - $(cmd_dtb_check) - -# NOTE: -# Do not replace $(filter %.dtb %.dtbo, $^) with $(real-prereqs). When a single -# DTB is turned into a multi-blob DTB, $^ will contain header file dependencies -# recorded in the .*.cmd file. -quiet_cmd_fdtoverlay = OVL $(quiet_dtb_check_tag) $@ - cmd_fdtoverlay = $(objtree)/scripts/dtc/fdtoverlay -o $@ -i $(filter %.dtb %.dtbo, $^) $(cmd_dtb_check) - -$(multi-dtb-y): FORCE - $(call if_changed,fdtoverlay) -$(call multi_depend, $(multi-dtb-y), .dtb, -dtbs) - -ifneq ($(CHECK_DTBS),) -DT_CHECKER ?= dt-validate -DT_CHECKER_FLAGS ?= $(if $(DT_SCHEMA_FILES),-l $(DT_SCHEMA_FILES),-m) -DT_BINDING_DIR := Documentation/devicetree/bindings -DT_TMP_SCHEMA := $(objtree)/$(DT_BINDING_DIR)/processed-schema.json -dtb-check-enabled = $(if $(filter %.dtb, $@),y) -endif - -$(obj)/%.dtb: $(obj)/%.dts $(DTC) $(DT_TMP_SCHEMA) FORCE - $(call if_changed_dep,dtc) - -$(obj)/%.dtbo: $(src)/%.dtso $(DTC) FORCE - $(call if_changed_dep,dtc) - -dtc-tmp = $(subst $(comma),_,$(dot-target).dts.tmp) - # Bzip2 # --------------------------------------------------------------------------- diff --git a/scripts/Makefile.modfinal b/scripts/Makefile.modfinal index 306a6bb86e4d..1482884ec3ca 100644 --- a/scripts/Makefile.modfinal +++ b/scripts/Makefile.modfinal @@ -30,8 +30,11 @@ quiet_cmd_cc_o_c = CC [M] $@ %.mod.o: %.mod.c FORCE $(call if_changed_dep,cc_o_c) +$(extmod_prefix).module-common.o: $(srctree)/scripts/module-common.c FORCE + $(call if_changed_dep,cc_o_c) + quiet_cmd_ld_ko_o = LD [M] $@ - cmd_ld_ko_o += \ + cmd_ld_ko_o = \ $(LD) -r $(KBUILD_LDFLAGS) \ $(KBUILD_LDFLAGS_MODULE) $(LDFLAGS_MODULE) \ -T scripts/module.lds -o $@ $(filter %.o, $^) @@ -54,13 +57,13 @@ if_changed_except = $(if $(call newer_prereqs_except,$(2))$(cmd-check), \ printf '%s\n' 'savedcmd_$@ := $(make-cmd)' > $(dot-target).cmd, @:) # Re-generate module BTFs if either module's .ko or vmlinux changed -%.ko: %.o %.mod.o scripts/module.lds $(and $(CONFIG_DEBUG_INFO_BTF_MODULES),$(KBUILD_BUILTIN),vmlinux) FORCE +%.ko: %.o %.mod.o $(extmod_prefix).module-common.o scripts/module.lds $(and $(CONFIG_DEBUG_INFO_BTF_MODULES),$(KBUILD_BUILTIN),vmlinux) FORCE +$(call if_changed_except,ld_ko_o,vmlinux) ifdef CONFIG_DEBUG_INFO_BTF_MODULES +$(if $(newer-prereqs),$(call cmd,btf_ko)) endif -targets += $(modules:%.o=%.ko) $(modules:%.o=%.mod.o) +targets += $(modules:%.o=%.ko) $(modules:%.o=%.mod.o) $(extmod_prefix).module-common.o # Add FORCE to the prerequisites of a target to force it to be always rebuilt. # --------------------------------------------------------------------------- diff --git a/scripts/Makefile.modinst b/scripts/Makefile.modinst index 0afd75472679..4d81ed9af294 100644 --- a/scripts/Makefile.modinst +++ b/scripts/Makefile.modinst @@ -30,10 +30,12 @@ $(MODLIB)/modules.order: modules.order FORCE quiet_cmd_install_modorder = INSTALL $@ cmd_install_modorder = sed 's:^\(.*\)\.o$$:kernel/\1.ko:' $< > $@ -# Install modules.builtin(.modinfo) even when CONFIG_MODULES is disabled. +# Install modules.builtin(.modinfo,.ranges) even when CONFIG_MODULES is disabled. install-y += $(addprefix $(MODLIB)/, modules.builtin modules.builtin.modinfo) -$(addprefix $(MODLIB)/, modules.builtin modules.builtin.modinfo): $(MODLIB)/%: % FORCE +install-$(CONFIG_BUILTIN_MODULE_RANGES) += $(MODLIB)/modules.builtin.ranges + +$(addprefix $(MODLIB)/, modules.builtin modules.builtin.modinfo modules.builtin.ranges): $(MODLIB)/%: % FORCE $(call cmd,install) endif @@ -146,7 +148,7 @@ quiet_cmd_gzip = GZIP $@ quiet_cmd_xz = XZ $@ cmd_xz = $(XZ) --check=crc32 --lzma2=dict=1MiB -f $< quiet_cmd_zstd = ZSTD $@ - cmd_zstd = $(ZSTD) -T0 --rm -f -q $< + cmd_zstd = $(ZSTD) --rm -f -q $< $(dst)/%.ko.gz: $(dst)/%.ko FORCE $(call cmd,gzip) diff --git a/scripts/Makefile.package b/scripts/Makefile.package index 4a80584ec771..11d53f240a2b 100644 --- a/scripts/Makefile.package +++ b/scripts/Makefile.package @@ -147,8 +147,7 @@ snap-pkg: PHONY += pacman-pkg pacman-pkg: @ln -srf $(srctree)/scripts/package/PKGBUILD $(objtree)/PKGBUILD - +objtree="$(realpath $(objtree))" \ - BUILDDIR="$(realpath $(objtree))/pacman" \ + +BUILDDIR="$(realpath $(objtree))/pacman" \ CARCH="$(UTS_MACHINE)" \ KBUILD_MAKEFLAGS="$(MAKEFLAGS)" \ KBUILD_REVISION="$(shell $(srctree)/scripts/build-version)" \ diff --git a/scripts/Makefile.vmlinux b/scripts/Makefile.vmlinux index 5ceecbed31eb..1284f05555b9 100644 --- a/scripts/Makefile.vmlinux +++ b/scripts/Makefile.vmlinux @@ -33,6 +33,24 @@ targets += vmlinux vmlinux: scripts/link-vmlinux.sh vmlinux.o $(KBUILD_LDS) FORCE +$(call if_changed_dep,link_vmlinux) +# module.builtin.ranges +# --------------------------------------------------------------------------- +ifdef CONFIG_BUILTIN_MODULE_RANGES +__default: modules.builtin.ranges + +quiet_cmd_modules_builtin_ranges = GEN $@ + cmd_modules_builtin_ranges = gawk -f $(real-prereqs) > $@ + +targets += modules.builtin.ranges +modules.builtin.ranges: $(srctree)/scripts/generate_builtin_ranges.awk \ + modules.builtin vmlinux.map vmlinux.o.map FORCE + $(call if_changed,modules_builtin_ranges) + +vmlinux.map: vmlinux + @: + +endif + # Add FORCE to the prerequisites of a target to force it to be always rebuilt. # --------------------------------------------------------------------------- diff --git a/scripts/Makefile.vmlinux_o b/scripts/Makefile.vmlinux_o index d64070b6b4bc..0b6e2ebf60dc 100644 --- a/scripts/Makefile.vmlinux_o +++ b/scripts/Makefile.vmlinux_o @@ -45,9 +45,12 @@ objtool-args = $(vmlinux-objtool-args-y) --link # Link of vmlinux.o used for section mismatch analysis # --------------------------------------------------------------------------- +vmlinux-o-ld-args-$(CONFIG_BUILTIN_MODULE_RANGES) += -Map=$@.map + quiet_cmd_ld_vmlinux.o = LD $@ cmd_ld_vmlinux.o = \ $(LD) ${KBUILD_LDFLAGS} -r -o $@ \ + $(vmlinux-o-ld-args-y) \ $(addprefix -T , $(initcalls-lds)) \ --whole-archive vmlinux.a --no-whole-archive \ --start-group $(KBUILD_VMLINUX_LIBS) --end-group \ diff --git a/scripts/basic/fixdep.c b/scripts/basic/fixdep.c index 84b6efa849f4..cdd5da7e009b 100644 --- a/scripts/basic/fixdep.c +++ b/scripts/basic/fixdep.c @@ -99,6 +99,8 @@ #include <stdio.h> #include <ctype.h> +#include <xalloc.h> + static void usage(void) { fprintf(stderr, "Usage: fixdep <depfile> <target> <cmdline>\n"); @@ -131,12 +133,9 @@ static unsigned int strhash(const char *str, unsigned int sz) static void add_to_hashtable(const char *name, int len, unsigned int hash, struct item *hashtab[]) { - struct item *aux = malloc(sizeof(*aux) + len); + struct item *aux; - if (!aux) { - perror("fixdep:malloc"); - exit(1); - } + aux = xmalloc(sizeof(*aux) + len); memcpy(aux->name, name, len); aux->len = len; aux->hash = hash; @@ -228,11 +227,7 @@ static void *read_file(const char *filename) perror(filename); exit(2); } - buf = malloc(st.st_size + 1); - if (!buf) { - perror("fixdep: malloc"); - exit(2); - } + buf = xmalloc(st.st_size + 1); if (read(fd, buf, st.st_size) != st.st_size) { perror("fixdep: read"); exit(2); diff --git a/scripts/generate_builtin_ranges.awk b/scripts/generate_builtin_ranges.awk new file mode 100755 index 000000000000..b9ec761b3bef --- /dev/null +++ b/scripts/generate_builtin_ranges.awk @@ -0,0 +1,508 @@ +#!/usr/bin/gawk -f +# SPDX-License-Identifier: GPL-2.0 +# generate_builtin_ranges.awk: Generate address range data for builtin modules +# Written by Kris Van Hees <kris.van.hees@oracle.com> +# +# Usage: generate_builtin_ranges.awk modules.builtin vmlinux.map \ +# vmlinux.o.map > modules.builtin.ranges +# + +# Return the module name(s) (if any) associated with the given object. +# +# If we have seen this object before, return information from the cache. +# Otherwise, retrieve it from the corresponding .cmd file. +# +function get_module_info(fn, mod, obj, s) { + if (fn in omod) + return omod[fn]; + + if (match(fn, /\/[^/]+$/) == 0) + return ""; + + obj = fn; + mod = ""; + fn = substr(fn, 1, RSTART) "." substr(fn, RSTART + 1) ".cmd"; + if (getline s <fn == 1) { + if (match(s, /DKBUILD_MODFILE=['"]+[^'"]+/) > 0) { + mod = substr(s, RSTART + 16, RLENGTH - 16); + gsub(/['"]/, "", mod); + } else if (match(s, /RUST_MODFILE=[^ ]+/) > 0) + mod = substr(s, RSTART + 13, RLENGTH - 13); + } + close(fn); + + # A single module (common case) also reflects objects that are not part + # of a module. Some of those objects have names that are also a module + # name (e.g. core). We check the associated module file name, and if + # they do not match, the object is not part of a module. + if (mod !~ / /) { + if (!(mod in mods)) + mod = ""; + } + + gsub(/([^/ ]*\/)+/, "", mod); + gsub(/-/, "_", mod); + + # At this point, mod is a single (valid) module name, or a list of + # module names (that do not need validation). + omod[obj] = mod; + + return mod; +} + +# Update the ranges entry for the given module 'mod' in section 'osect'. +# +# We use a modified absolute start address (soff + base) as index because we +# may need to insert an anchor record later that must be at the start of the +# section data, and the first module may very well start at the same address. +# So, we use (addr << 1) + 1 to allow a possible anchor record to be placed at +# (addr << 1). This is safe because the index is only used to sort the entries +# before writing them out. +# +function update_entry(osect, mod, soff, eoff, sect, idx) { + sect = sect_in[osect]; + idx = sprintf("%016x", (soff + sect_base[osect]) * 2 + 1); + entries[idx] = sprintf("%s %08x-%08x %s", sect, soff, eoff, mod); + count[sect]++; +} + +# (1) Build a lookup map of built-in module names. +# +# The first file argument is used as input (modules.builtin). +# +# Lines will be like: +# kernel/crypto/lzo-rle.ko +# and we record the object name "crypto/lzo-rle". +# +ARGIND == 1 { + sub(/kernel\//, ""); # strip off "kernel/" prefix + sub(/\.ko$/, ""); # strip off .ko suffix + + mods[$1] = 1; + next; +} + +# (2) Collect address information for each section. +# +# The second file argument is used as input (vmlinux.map). +# +# We collect the base address of the section in order to convert all addresses +# in the section into offset values. +# |